Contact us if you have any question or you can't find the system you were looking for.
A-10 HIGH QUALITY INDUSTRIAL SYNTHETIC SYSTEM
General Information
1K SYSTEM
CORROSIVITY: C3 | MEDIUM
CORROSIVITY: C3 | MEDIUM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Shotblasted steel | Brushed |
| Iron | Sand-Blasting |
Sectors
¿Quieres obtener más información?
ENVIAR CONSULTADESCRIPTION AND FEATURES
System meant for the painting of metallic structures, boilerwork, agricultural machinery and public works, fork- lifts, cranes, construction material, metal works, industrial vehicle. Quality process recommended for a good resistance to oxidation to a medium cost.
RESISTANCE AND CERTIFICATES
240H SALT SPRAY TEST
An independent approved Laboratory certifies that this System meets the requirements for category C3 Medium in accordance to ISO 12944-2 (Shotblasted Steel Sa 2½).
120H HUMIDITY TEST
PRODUCTS
F-29
Q/D ZINC PHOSPHATE PRIMER
| Physical properties | |
|---|---|
| Type of product | Modified Alkyd - Zinc Phosphate |
| Density 20 °C | 1,32 - 1,48 |
| Supply viscosity at 20 °C | 100 - 150 sec. Ford n.° 4 |
| Solid Content (% weight) | 63 - 69% |
| Solid Content (% volume) | 44 - 49% |
| V.O.C. | 556 g/l (ready to use) |
| Color | Oxyd 8012, Creme Light 2020 |
| Features of dry film | |
|---|---|
| Theoretical yield | 12 - 14 m² / l. (35 my) |
| Gloss 60 - 60° | Matt < 5% |
| Recoatability | 6 - 8 h. |
BESA-VAL
Q/D Industrial Paint
| Physical properties | |
|---|---|
| Type of product | Modified Alkyd |
| Density 20 °C | 0,97 - 1,11 |
| Supply viscosity at 20 °C | 70 - 90 sec. Ford n.° 4 |
| Solid Content (% weight) | 40 - 50% |
| Solid Content (% volume) | 34 - 37% |
| V.O.C. | 556 g/l (ready to use) |
| Color | s/m URKI-SYSTEM |
| Features of dry film | |
|---|---|
| Theoretical yield | 9,5 - 10,5 m² / l. (35 my) |
| Gloss 60 - 60° | 90 - 95% |
| Recoatability | 24 h. |
APPLICATION PROCESS
SURFACE PREPARATION
STEEL
The surfaces should be thoroughly degreased and deoxidized or shotblasted.
APPLICATION
F-29
20-25" 
URKISOL 222 5-10% 
URKISOL 88 15-20% Ø 1,6-1,8 mm. 
30-40 my 
Non sticky 30 ́ 
5-10 ́ 
URKISOL 88 5% 0,011-0,013” 
URKISOL 88 5% 0,011-0,013”
BESA-VAL
25±5” 
URKISOL 170/300 20-30% 
30-40 my 
Touch free 30’ Non Sticky. 2 h. 
URKISOL 170/300 5-10% 0,009-0,011” 
URKISOL 170/300 5-10% 0,009-0,011”
General Information
1K SYSTEM
CORROSIVITY: C3 | MEDIUM
CORROSIVITY: C3 | MEDIUM
| Support type | Surface pretreatment |
|---|---|
| Steel | Degreased |
| Shotblasted steel | Brushed |
| Iron | Sand-Blasting |
Sectors