POSTS
BESA-NATO 2K DTM Acrylic Enamel
General Information
| Compatibility and surface | Application |
|---|---|
| Steel | Airbrush |
| Stainless steel | Airmix |
| Aluminum | Airless |
| Galvanized | |
| Iron | |
| PVC | |
| ABS Plastic | |
| GRP | |
| Glass | |
| PUR | |
| Ceramics | |
| PC | |
| MA | |
| Brass |
| Quality | Gloss |
|---|---|
| 2K | Glossy |
PRODUCT DESCRIPTION
"USE ONLY IN INDUSTRIAL FACILITIES"
Glossy enamel, does not yellow. Good physicochemical resistance, outdoor resistance and direct adhesion on many surfaces: Steel, Stainless Steel, Aluminium, Brass, Galvanized, Glass, Plastics ABS, PUR, MA, GRP, PVC, Ceramics.
Up to 200 hours in Salt Spray Test on shotblasted steel.
APPLICATION
E-224 (*) 2:1 vol. 
> 3 h. 
20-30" 
URKISOL-8229 or 900/P 15-20 % vol. 
40-50 my 
Air: Non Sticky 4-5 h. 
10-15' Cabin: 70°C/30' 
20' 
URKISOL 8229 10-15% 0,009-0,011" 
URKISOL 8229 10-15% 0,009-0,011"
Aerographic application: Dilute with Thinner URKISOL 8229 or URKISOL 900/P.
In summer or warm days, it is possible to use URKISOL 3700.
Leave paint settle 15 ́before painting.
For application with Airmix Equipments, dilute with URKISOL 8220.
(*) Use E-745 as accelerator (never use the hardener E-202 or the accelerator E-750) between 0-5% (pot-life will be affected depending on the %).
DATA SHEET
PHYSICAL PROPERTIES
| Density at 20 °C (g/cc) | 1,00 - 1,25 |
| Grinding Fineness (μ) | 5 - 10 |
| Supply viscosity at 20 °C | 70 - 95 KU (Stormer) |
| % Solids content (weigth / volume) | 52 - 60 % weight; 45 - 48 % volume. (Mixture with hardener) |
| V.O.C. (g/l) | 548 (Ready to use) |
| Type of product | Acrylic Polyurethane Aliphatic |
| Colour | URKI-SYSTEM |
SURFACE PREPARATION
The surfaces must be free of rust, grease or dirt.
Galvanized: If old, brush and degrease.
On plastics clean with Thinner n.° 94. In case of PVC, degrease with URKISOL-88.
On Powder Coatings and Coal Coatings, aprevious sanding is recommended. After it , degrease with URKISOL-300. Depending on the type and conditions of the supports.
FEATURES OF DRY FILM
| Theoretical yield (m²/l) | 10 - 11 (45 my) |
| Gloss 60° - 60° | > 95 % |
| Second layer | 18 h. |
STORAGE
Keep under cover in a cool and well-ventilated place avoiding direct sunlight. Temperatures between 5 and 30 °C recommended.
Can life: 2 years from manufacturing in date its original unopened container. Consult our Technical Department once date has expired.
COVERAGE CALCULATOR
How much do you need?
Find out by using our Coverage Calculator
Amount of product requiredKgi
General Information
| Compatibility and surface | Application |
|---|---|
| Steel | Airbrush |
| Stainless steel | Airmix |
| Aluminum | Airless |
| Galvanized | |
| Iron | |
| PVC | |
| ABS Plastic | |
| GRP | |
| Glass | |
| PUR | |
| Ceramics | |
| PC | |
| MA | |
| Brass |
| Quality | Gloss |
|---|---|
| 2K | Glossy |
RELATED PRODUCTS
Products that may interest you
DO YOU WANT TO IMPROVE YOUR KNOWLEDGE AND WORK PROCESSES?
POSTS
TRAINING FOR SAFE USE OF DIISOCYANATES: EVERYTHING YOU NEED TO KNOW
POSTS
Static Electricity in Painting: Hazards and measures to be taken
POSTS
Importance of Colour in Industrial Vehicle Repainting
POSTS
6 tips for coating paint with airless equipment
POSTS